Quantcast
Channel: Gemalto Sentinel Customer Discussions
Viewing all 1619 articles
Browse latest View live
↧

Re : BSOD when install Sentinel LDK SDK

February 8, 2017, 6:52 am
$
0
0

Hello Jerome,

 

Thanks for raising the concern.

 

Please be informed that the given issue is known to us and it has been fixed in the latest LDK runtime release.

 

Kindly use the below link to download the Runtime drivers and try to install the LDK SDK afterwards.

 

https://sentinelcustomer.gemalto.com/DownloadNotice.aspx?dID=8589947873.

 

Installation steps:

1-     Open the folder location of haspdinst.exe in cmd (admin mode).

2-     Run the following commands :

>  haspdinst –purge (to remove previous installations)

>  haspdint –i (to install)

 

Hopefully it should help to bypass the issue.

 

Please feel free to write us if you have any further concerns.

 

With regards,


Parth Kaushik

 

↧
Search

Re : BSOD when install Sentinel LDK SDK

February 8, 2017, 10:41 am
$
0
0
It's working with your solution!

Thank you for your quick answer!

Jerome
↧
↧

Re : BSOD when install Sentinel LDK SDK

February 9, 2017, 5:37 am
$
0
0
Hello Jerome.

Thanks for the response.

We are glad to know if the provided workaround helped.

Have a nice day ahead.

Regards,
Parth
↧

Re : SafeNet USB SuperPro/UltraPro problem on Windows Server 2012 VM

February 9, 2017, 7:11 am
$
0
0
Thanks very much Heena.

So if I understand correctly what you're saying, the option to enable/disable application execution on terminal clients is available to the developer of the software (the software in this case being EXACT/Examine Pro) and, therefore, the software vendor should be able to assist from this point if the hardware key is not recognised (assuming it is recognised by Safenet SAM). I that correct?

Many thanks again,

Mark
↧

Re : SafeNet USB SuperPro/UltraPro problem on Windows Server 2012 VM

February 10, 2017, 3:47 am
$
0
0
Hi Mark,

Yes, you are correct.

Thanks,
Heena
↧
↧

HASP vs Sentinel Desktop 12

February 14, 2017, 4:06 am
$
0
0
Hi,
I have a problem with Sentinel- Hardlock dongle key on Parallels Desktop 12.
Paralleles detects the dongle key in the devices list but when I restart the Window VM the dongle is not connect anymore.
The same happen when the VM goes to sleep mode: when I wake up the VM, the dongle key is checked in the "Rapid USB menu" but the Windows VM cannot see it on Device Manager...

The only things that works is unplug and plug again the dongle while the VM is running...
or go in the top right corner in the USB Fast Menu and deselect and select again the dongle key...

I have tried a lot of things, from update the Sentinel HASP driver to make the permanent association in the USB Preferences of the VM...

In any case I have tried both and nothing changed: I must deselect an select again the dongle from the Rapid USB menu every time the VM is booted or wake up from sleep mode...

Any help?
↧

Re : HASP vs Sentinel Desktop 12

February 14, 2017, 6:09 am
$
0
0

Hi Giordix,

 

Thanks for sharing the concern !

 

Just to inform you, Hardlock is already End of Support\Development and also it is not tested on the environment in use.

 

To troubleshoot the issue, you may try installing our latest Hasp drivers from the below link:

 

Link: https://sentinelcustomer.gemalto.com/DownloadNotice.aspx?dID=8589947119

 

You may also test if the issue we are facing happens with only Hardlock keys or any other USB devices? Also try using the Hardlock key on a physical machine and check if it works fine there or not?

 

Hope these steps helps.

 

Regards,

Gemalto Support

↧

Re : HASP vs Sentinel Desktop 12

February 14, 2017, 6:26 am
$
0
0
Hi, thanks for your answer.
As I write, I have tried the last version of the driver, the 7.53 and nothing changed.

It's not a problem about the specific Hardlock Dongle Key, but I have the same issue with other dongle key and with other type of dongle, like the Sentinel Max.

I have no problem with a normal USB stick, it is recognize automaticcaly every time.
I have no problem with the dongle key on a physical machine.

The problem, infact, is with the combination MacOS with Parallels Desktop while running a Windows Vrtual Machine.

Even if the dongle is selected in the USB device of Paralles Desktop after a restart, the VM cannot "see" the dongle plugged; I must deselect it and reselect again (or unplug/plug manually) to active it.

I have also tried the permanent USB device association in the Parallels Desktop settings, but nothing changed.
↧
Search

Re : HASP LDK - Same "Sentinel LM ID" on 2 pc's: HASP HL Nettime 50 not seen on one of them

February 21, 2017, 8:29 am
↧
↧

Sentinel Protection Installer 7.6.5

February 21, 2017, 11:19 am
$
0
0
How/where can I download older versions of Sentinel Protection Installer. I'm specifically looking for version 7.6.5.

Thanks in advance :)
↧

Re : Sentinel Protection Installer 7.6.5

February 21, 2017, 11:47 am
↧

Re : Sentinel Protection Installer 7.6.5

February 21, 2017, 12:05 pm
$
0
0
Hi Anubhav,

Thanks for that, but I specifically need version 7.6.5.

The software vendor tells me they've had issues with some of the later versions and tells me I need version 7.6.5. I'm preparing for an on-site visit and would like to minimise the chances of any potential issues, especially with driver versions that the software vendor does not support. Is it possible to have version 7.6.5 emailed to me?

Thanks.
↧

Re : HASP LDK - Same "Sentinel LM ID" on 2 pc's: HASP HL Nettime 50 not seen on one of them

February 22, 2017, 3:36 am
$
0
0
Hi Hans,

Thank you for reply.

Good to see that issue is resolved now.

Regards,
Anubhav
↧
↧

Re : Sentinel Protection Installer 7.6.5

February 22, 2017, 3:39 am
↧

Re : Sentinel Protection Installer 7.6.5

February 22, 2017, 4:02 am
↧
Search

Error when starting the Sentinel license manager service

February 22, 2017, 12:20 pm
$
0
0
Hi, I cannot install a HASP driver installation because the sentinel run-runtime enviroment shows me this error during installation, this is a windows application and Im running it on ubuntu with wine. Please see attached screenshot.
↧

Re : Error when starting the Sentinel license manager service

February 22, 2017, 11:21 pm
$
0
0

Hello Nelson,

 

Thanks for raising the concern.

 

Please be informed that we can’t install the Sentinel RTE for windows over the Linux environment using wine application.

 

Hence, kindly use the link below to download and install the Linux (Ubuntu) drivers.

 

https://sentinelcustomer.gemalto.com/DownloadNotice.aspx?dID=8589945165

 

These drivers are of 32-bit architecture, hence if you are using 64 bit machine then you would require to run a compatibility script.

 

This is because the Linux environment doesn’t support 32 bit applications over 64 bit architecture.

 

Following is the link to download the compatibility script:

 

https://sentinelcustomer.gemalto.com/DownloadNotice.aspx?dID=34359739781

 

Kindly refer to the “readme files” along with the packages for detailed installation steps.

 

Please feel free to write back if you have any further concerns or if any further details required.

 

Best regards,


Parth

 

 

↧
↧

Re : Sentinel Protection Installer 7.6.5

February 23, 2017, 3:53 am
$
0
0
Hi Mark,

Thank you for reply.

Good to know that issue is resolved now.

Regards,
Anubhav
↧

Re : Error when starting the Sentinel license manager service

February 25, 2017, 1:00 pm
$
0
0
Hi again,

It was possible to install the sentinel applications, but unfortunately I couldnt run the application I wanted to run, I hoped it was for the sentinel package but it wasnt like that. I think the problem is with the wine application, but anyways thanks a lot.
↧

Re : Error when starting the Sentinel license manager service

February 26, 2017, 10:37 pm
$
0
0

Hello Nelson,

 

Thanks for the response.

 


However, if you believe this issue requires further levels of investigation from our side then please feel free to write us at support@safenet-inc.com .

 

 

With regards,

Parth Kaushik

 

 

↧
Viewing all 1619 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>