Dear all,
I'm having difficulties to run HASP LMS (hasplms.exe) on a system. At the end of the HASP driver install, it will tell me "Unable to start hasplms service with parameters 1144 0 0. ErrorCode: 48 5 574 0".
The key type used is a HASP HL Time USB key.
OS used is Windows 7 Professional.
Interesting thing is that I have 10+ systems running with exactly the same hardware configuration (computer system's hardware+software as well as the HASP HL Time key are identical), and this is the only system that gives this problem. Side note: these are computers running in a manufacturing environment.
Following has been tried/observed:
- Windows event log shows that the hasplms.exe executable crashes seconds after it is being started.
- Manually starting the hasplms service results in the same crash.
- No virus scan is installed.
- Windows firewall is disabled and no 3rd party firewall program is running.
- Verified that port 1947 is not in use by another program using command [netstat –aon] -> port 1947 is not in use == OK
- Verified correct installation of hardlock and aksfridge drivers using commands [sc queryex hardlock] and [sc queryex aksfridge] -> both are running == OK.
- Manual re-installation of drivers using commands [haspdinst –fr –kp –purge] and [haspdinst –i] -> driver reinstallation successful, but hasplms.exe keeps crashing with same error.
- Total re-installation of Windows + HASP drivers does not solve the problem (same error occurs).
- Tested a clone of the OS drive of one of the other 10+ systems (which has HASP LMS running OK) -> cloned drive gives the same problem on the "problem" system.
Based on the above, my conclusion is that a software problem is ruled out: a complete reinstall of the OS + HASP drivers does not solve the problem and even a software clone of a functional system gives the same problem.
Can anybody give a clue, based on the error code (48 5 574 0)?
Any help is much appreciated!